Description of system

ECO-TRONIC SPM is a connector system that was specially developed for use e.g. in refrigerators. ECO-TRONIC SPM is a panel mount application which can be inserted in the rear wall of a refrigerator. The cavity of this rear wall is filled with PU foam.. The panel mount application, which is contacted with cables, is inserted into the rear wall without any further manual work. No manual sealing is required for the panel mount application, saving valuable time and therefore reducing manufacturing costs. The molded seal prevents the PU foam from penetrating both inside the connector and through the opening in the panel mount wall. The seal has been verified under production conditions. In addition, a positive IP 67 test has been carried out.

Features

  • Sealed pin connector with IDC termination for panel mount applications
  • Seal against PU foam in refrigerators and freezers
  • Protection class IP 67 on the cable side, when installed
  • For mating connector according to white device specification RAST 2.5
  • Coding acc. to RAST 2.5

Technical data

Mechanical
Pitch MS 7352: 2.5 mm
MS 7353: 5 mm
Positions MS 7352: 3, 4, 5
MS 7353: 2, 3, 4
Termination IDC
Wire size 0.22 - 0.35 mm²
Insulation Ø 1.3 - 1.5 mm
Protection class IP 67 on the cable side, when installed
Type of wire stranded
For panel mount application 0.5 - 2.5 mm
 
Electrical
Rated current 4 A
Rated voltage Pitch 2.5 mm: 32 V
Pitch 5 mm: 250 V
Air gap and creeping distances Pitch 2.5 mm: > 0.9 mm
Pitch 5 mm: > 3 mm
Tracking resistance CTI ≥ 400
Approvals UL/ULC E96569
DIN EN 61984 (IEC 61984)
 
Material
Contact CuSn
Contact finishing Sn
Housing PA 66 GF, UL94 V-0,
Glow wire resistant, GWT 750°C acc. to 60335-1

Pin connectors

© 2024 STOCKO CONTACT