Crimp Housings

• Direct and indirect connectors with crimp termination
• Codings in accordance with the RAST 2.5 standard specification for home appliances
• Closed cable entries ensure long air and creepage distances
• Trimming polarizing pegs to individual requirements produces a large number of clearly defined connector combinations
• With direct edge versions, polarizing and locking feature for PCB
• Primary and secondary lock

Pin connectors

• In vertical and horizontal versions facilitate 90° and 180° cable angles
• SMT version for vertical PC board assembly

Pin connector panel mount

• Compatible with pin connector of ECO-TRONIC with IDC termination
• Lockable in metal thickness 0.8 ± 0.1 mm

Approvals crimp housings

Approvals pin connectors

Mechanical
Pitch	2.5 mm
Positions	2 - 12 (up to 20 on request)
Termination	crimp technology
Wire size	0.22 und 0.35 mm²
Insulation Ø	max. 1.4 mm
Hardness of insulation	Shore A 90° ± 5
Type of wire	stranded
Temperature range	-40°C ... +130°C 1)
Board thickness	1.55 ± 0.19 mm
1) The following applies: Upper limit temperature (contact carrier) RTI (electrical) of the UL Yellow Card.
Electrical
Rated current	2 A
Rated voltage	Pitch 2.5 mm: 32 V Pitch 5 mm: 250 V
Dielectrical strength	Fully assembled 2.5 mm: 1.4 kV Partially assembled 5 mm: 2.8 kV
Insulation resistance	> 109 Ω
Contact resistance	< 10 m Ω
Air gap and creeping distances	Pitch 2.5 mm: > 1 mm Pitch 5 mm: > 3 mm
Tracking resistance	CTI ≥ 400
Approved crimp connector	DIN EN 61984 (IEC 61984) According to: - VW 60330 - LV 214: 2010-03 - USCAR 2
Approved pin connectors	UL/ULC E96569 DIN EN 61984 (IEC 61984)
Materials
Contact	CuSn, Cu-Alloy
Contact finishing	Sn, NiAu
Housing	PA, glow wire resistant, GWT 750°C acc. to IEC 60335-1
Colour of housing	natural
Polarizing	to RAST 2.5
Derating-Curve
Wire size: 0.35 mm² / 12-way connector / on PCB