ECO-TRONIC SPM is a connector system that was specially developed for use e.g. in refrigerators. ECO-TRONIC SPM is a panel mount application which can be inserted in the rear wall of a refrigerator. The cavity of this rear wall is filled with PU foam.. The panel mount application, which is contacted with cables, is inserted into the rear wall without any further manual work. No manual sealing is required for the panel mount application, saving valuable time and therefore reducing manufacturing costs. The molded seal prevents the PU foam from penetrating both inside the connector and through the opening in the panel mount wall. The seal has been verified under production conditions. In addition, a positive IP 67 test has been carried out.
| Mechanical | |
|---|---|
| Pitch | MS 7352: 2.5 mm MS 7353: 5 mm |
| Positions | MS 7352: 3, 4, 5 MS 7353: 2, 3, 4 |
| Termination | IDC |
| Wire size | 0.22 - 0.35 mm² |
| Insulation Ø | 1.3 - 1.5 mm |
| Protection class | IP 67 on the cable side, when installed |
| Type of wire | stranded |
| For panel mount application | 0.5 - 2.5 mm |
| Electrical | |
| Rated current | 4 A |
| Rated voltage | Pitch 2.5 mm: 32 V Pitch 5 mm: 250 V |
| Air gap and creeping distances | Pitch 2.5 mm: > 0.9 mm Pitch 5 mm: > 3 mm |
| Tracking resistance | CTI ≥ 400 |
| Approvals | UL/ULC E96569 DIN EN 61984 (IEC 61984) |
| Material | |
| Contact | CuSn |
| Contact finishing | Sn |
| Housing | PA 66 GF, UL94 V-0, Glow wire resistant, GWT 750°C acc. to 60335-1 |
