Pitch 5 mm

Connector System

ECO-FLEX ML

Tab connector with bridging contacts
Connector system allowing individual, free contact combinations in accordance with the RAST 5 - standard specification for home appliance
Versions for vertical or horizontal PC board assembly
For dual-in-line or in-line hole patterns
Contact surface lead-free
Clear grouping of connecting positions using movable inserts or empty spaces
Neutral and/or grounded bridging contacts
Individual polarizing possible
Polarizing pegs optional
Advancing tab contacts as grounded conductor optional

Suitable for RAST 5 indirect connectors in screw, crimp, or IDC technology (In case of advancing tab contacts subject on request)
8105B screw type)
EH 688 / EH 699 (crimp type)
ECO-DOMO (IDC type)

Mechanical
Pitch	5 mm
Positions	2 - 30 depending on number of inserts), higher pole versions on request
Contacts	tabs 6.3 x 0.8 mm
Termination	soldering
Temperature range	-40°C ... +120°C

Electrical
Rated current	10 A at T_Umg 65°C
Operating voltage	250 V AC
Surge category¹⁾	II
Test voltage	2.5 KV / 60 s
Insulation group¹⁾	II
Tracking resistance¹⁾	CTI ≥ 400
Air gap and creeping distances	≥ 4 mm
Insulation resistance	> 10¹⁰ Ω
Contact resistance	< 10 m Ω
Approvals	DIN EN 61984 (IEC 61984) UL/ULC E96569 (only series MS 941x)

Materials
Housing	PA, glow wire resistant, GWT 750°C acc. to IEC 60335-1
Colour of housing	housing: natural SMT pin connector: black
Contact	CuZn / CuSn
Contact finishing	Sn

¹⁾ according to IEC 60664